POLYCLAR 730 supplied in a resealable pouch

Contains 250g

Polyclar 730 is blend of polyvinylpolypyrrolidone (PVPP) and silica xerogel, an efficient single dose, balanced beer stabiliser.

It offers the following key benefits:

• Single Use stabiliser

• Simultaneous removal of proteins, tannoids and polyphenols

• Optimised ratio for preventing chill and permanent haze

• Enables flocculation of hydrated xerogel particles

• Improved material dispersion and transfers

• No settling of slurry at bottom of secondary vessels

• High absorptive capacity for haze forming precursors

• No Negative impact on foam or flavour

• Completely insoluble in beer

• Ease of cleaning from 1micron absolute filters commonly used in home breweries

• Effective results are usually attained by use of 5-10g per 23L of beer

Instructions:

Add the required dose to a sanitised Erlenmeyer flask or other suitable receptacle for continuous agitation for 1hr. Add to deoxygenated water (pre-boiled water & if possible, flush vessel with co2) 100ml deoxygenated water per 10g dose of Polyclar 730 (10:1 by weight minimum) and agitate continuously to rehydrate effectively. A stir plate is the most effective method. Gently add the solution to the beer in a keg and allow Minimum 3 minutes contact time, preferably 15 minutes contact time for best results before filtering at low pressure (<3psi) through an absolute 1micron filter to the receiving keg. Gravity filtering from a secondary vessel to a keg may be effective. Exceptional clarity will result along with good beer stability.